The Classic Faceplate can be flush mounted or inset into a pilaster, column, or on a wall next to your front door (shown flush mounted). This model comes complete with a ten inch aluminum mail storage can and lockable front access door. Available in all colors and with High Security option. Outgoing Flag not available on this model. The Standard Mail slot (10"W x 2-7/8"T) is large enough to accommodate small packages and bundles of mail.

May also be kept unlocked - door will stay closed with the magnetic catch.

The top door, for the incoming mail, opens like an oven door, with hinges on the bottom. The bottom door opens similar to a refrigerator door, with the hinge on the right side.

Front Face Measures 13-1/8" High X 14-7/8"Wide. It's 1" deep.

The Aluminum "Can" (the part that holds the mail) is 11-3/8" High X 13-1/8" Wide. It is 10" deep and can be made larger with sheet metal by your installer.

$299 + $25 Shipping & Handling.

Optional Accessories:

The High Security option restricts an unwanted hand from entering the box. This option can not be added later, must be ordered from the manufacturer when purchasing the mailbox but it may be removed at a later time, if desired. This option makes it so the opening is 1-1/4"T X 10"W.

Doors Available in 4 Different Colors
This mailbox is accented with solid brass doors which are hand finished. Choices are the Standard Polished Brass finish at no additional charge OR a weathered bronze antique Verdigris patina, OR a Satin Nickel OR an Antique Brass. These doors will not tarnish over time, instead they will continue to weather into a beautiful natural patina. These accents are available in with all stock colors and are excellent for coastal communities.

Brass mailbox flag for brick mailboxes. $69 + FREE S&H

Red mailbox flag for brick mailboxes. $49 + FREE S&H

Mailbox Flag for Brick Mailboxes Installation Instructions To mount on brick or stone, MAKE SURE that you place the flag low enough to the ground and close enough to the front of the column or pillar that the mail carrier can reach if from their vehicle. See to it that you have at least 9 inches of space above where you intend to place the flag so it can pivot freely up and down. Using a masonry drill bit ¼” in diameter, simply drill 2 holes exactly ¾” apart, one directly above the other. Completely tap in the blue anchors. Place the stainless steel screw through the stainless washer, through the flag, through the nylon bushing (small, taper side up) and into the blue plastic anchor. Do that again with the second screw. Tighten until snug.

Almond/Polished Brass	Black/Polished Brass	Bronze/Polished Brass
Charcoal/Polished Brass	Green/Polished Brass	White/Polished Brass
Almond/Verde Brass	Metallic Bronze/Antique Bronze	White/Satin Nickel
Black/Verde Brass Metallic Bronze/ Verde Brass Metallic Charcoal/ Verde Brass Green/Verde Brass White/Verde Brass Almond/Antique Bronze Black/Antique Bronze Metallic Charcoal/ Antique Bronze Green/Antique Bronze White/Antique Bronze Almond/Satin Nickel Black/Satin Nickel Metallic Bronze/ Satin Nickel Metallic Charcoal/ Satin Nickel Green/Satin Nickel